background image

915400

7

Ensure that the Austlift Davit System is compatible with other items when assembled into

a system. Usage with other incompatible items may be dangerous & hazardous as the safe

function of one item may be affected or interfere with the safe function of another.

It is essential for the safety of the user that if the product is resold outside the original

country of destination, the reseller shall provide instruction for use, for maintenance, for

periodic examination and for repair in the language of the country in which the product is

to be used.

If  used  properly,  the  Austlift  Davit  System  has  a  life  span  of  10  years  from  the  date  of

manufacture  unless  subjected  to  severe  abrasions  or  extreme  temperatures/climatic

conditions.

The Austlift Davit System shall be used only for Vertical movement, up or down.

Only suitable for use with a weight of up to 136kg.

Ensure that the harness complies with AS/NZS1891.1 and is adjusted to the user’s size, is

free from damage and is in good condition.

Also  ensure  that  the  equipment  has  not  exceeded  its  yearly  inspecon  date  and  if  so  an 

inspecon is r equired by a competent person prior to use.

The Following condions  may be hazardous & may a�ect the performance of the Davit System:

1. Extreme temperatures
2. Trailing or looping of Lanyards over sharp edges.
3. Extreme acidic or basic environments.
4. Abrasive or sharp edged structures which can damage the equipment.
5. Grease, oil, and harmful chemicals.
6. Direct exposure to rain and moisture.
7. Ultraviolet radiation.

IMPORTANT

GENERAL INSTRUCTIONS FOR USE 

OF THE AUSTLIFT DAVIT SYSTEM

A rescue plan shall be in place to deal with any emergencies that could arise during the

work.

Do  not  make  any  alterations  or  additions  to  the  Austlift  Davit  System  without  the

manufacturer’s prior written consent.

The Austlift Davit System shall not be used outside its limitation, or for any purpose other

than that for which it is intended.

The user should carry out a pre-use check of the Austlift Davit System, to ensure that it is in

a serviceable condition and operates correctly before it is used.

The pre-use check shall involve checking for any wear or abrasion on wire rope and signs

of cuts, frays, damage.

Withdraw from use immediately if there is any doubt about its safe condition or if it has

already arrested a fall.

Use karabiners conforming to EN362 for connecting to the anchor points.

Содержание 915400













Отзывы: