12
ALC SIM 915303_19
SER
VICE MANU
AL (V
OL:1)
www.austlift.com.au
WEBBING INERTIA REEL BLO
CK
915303
STEP 17
STEP 18
Remove the Web Washer. It is essential to replace this Web Washer Every
time you service a Retractable. So it would be better to discard it and get
a new one in its place.
Check the embossed pin on the drum if they are worn out, if yes, change
the drum with a new one.
Remove the webbing from the drum and check the entire length for any
damages or abrasion marks. In case of any doubt about the condition
of webbing, replace it with a new one. It is not necessary to replace the
webbing Lanyard assembly every time you service a block. Now assemble
it backwards doing the opposite of Step 17, 16,15, 14 and Step 13, i.e putting
back the new web Washer followed by the new Friction Plate, then the
Brake Plate followed by the new Pressure Washer and then the Chuck Nut
Web washer
Embossed
pin
