Austin Hughes CyberView CV-S101, Руководство пользователя

Страница: 10 / 12

UM-CV-751-CV-S101-Q215V1 www.austin-hughes.com
< Part 3 > Keyboard Hotkey Command
Command Function
C
To switch between Local and Remote ports
Q
To turn the beep sound on or off
S
To activate the Auto-Scan function. Auto-scan Remote
and Local port every 8 seconds repeatedly.
A
For auto-adjust video signal of remote port to optimum
You can switch the Receiver from “Local Host” port to “RJ-45” port and vice-versa through simple key se-
quences made by the remote console side. To send commands to the Receiver, you must press the hotkey
(default is Scroll Lock) twice within 2 seconds. You will hear a beep sound con
fi rming you are in the hotkey
mode. If you do not press any key during hotkey mode over 2 seconds the hotkey mode will be terminated
and back to normal state.
The default hotkey is Scroll Lock but you can change hotkey as your application convenience. If you prefer to
use other hotkey, please go to OSD menu and change the default hotkey to the other.
The table blow lists all the supported hotkey commands.
Scroll
Lock
Scroll
Lock
Example:
P.7
CV-S101