UM-CV-F101-Q421V1 www.austin-hughes.com
P. 6
CV-F101
< 2.1 > Connection Diagram
< 2.2 > Connection Instruction
< Part 2 > Installation
•
Connect the source devices to the Transmitter HDMI-In port with a HDMI cable, and connect the Receiver
HDMI-Out port with another HDMI cable.
•
Connect the Transmitter RJ-45 Out port to the Receiver RJ-45 In port via a network cable ( CAT5/ 6/ 7 ).
•
If using HDMI loop out, connect the display device to the Transmitter HDMI-Out port.
•
It is recommended to use a length range within 2 ~ 70M network cable.
If the cable is too short, it may cause no display output because of too strong signal. If the cable is too long,
it may cause poor output quality.
