Aussievan Easy Tune BD-11DX Скачать руководство пользователя страница 7

6

To test for compatibility: 

1.  Unplug all coaxial cables to the base unit. 
2.  Power up only the base unit with the 12Vac adaptor provided. 
3.  A red light will come on in the base unit window. 
4.  Plug one end of the short coaxial cable into the antenna wall connection. 
5.  Plug the other end of the short coaxial cable to ANTENNA on base unit while looking at 

the red light in the base unit window. 

6.  If red light goes off or dims, unplug immediately! The antenna wall connection is NOT 

compatible. In such cases DO NOT use wall connections with BD-11DX antenna. 

7.  If red light remains on, the antenna wall socket is compatible. 

NOTE: We highly recommend the use of a hole-through-the-wall fitting 
available in most caravan accessories shop.  This hole-through-the-wall 
allows the antenna cable to connect directly to the base unit and ensures a 
trouble free operation at all times eliminating any possibilities of faults in 
the caravan wall connections or its internal wiring. 

Caution!

 The power adaptor has a built-in thermal fuse that is non-user-replaceable.  Leaving 

the power adaptor plugged in with an incompatible antenna wiring will cause the power 
transformer to heat up and eventually burn out the thermal fuse rendering the transformer 
useless.  In such cases, a replacement transformer has to be purchased from Aussievan 
Products and would not be covered under warranty. 

Warning!  Never use any coaxial cables other than the ones supplied with 
the antenna.  Never attempt to lengthen or shorten any of the supplied 
coaxial cables by splicing.  An improperly spliced cable or an improperly 
terminated cable connector could cause fire hazards due to short circuit and 
will cause the transformer to heat up and eventually activating the internal 
thermal safety fuse rendering the transformer useless.  Never use the 
adapter for any other appliance other than the intended product.  Never 
connect any other antenna product to the EasyTune BD-11DX base unit.
Irreparable damage may result.  Any of the above will result in void of 
warranty. 

Produced Exclusively For Big Blue Group Pty Ltd 

trading as 

Aussievan Products Pty Ltd

ABN 26 167 791 479

1 Ranleigh Rise, Sunbury

Vic Australia 3429

Email: [email protected]

www.aussievan.com.au 

Made In China 

Содержание Easy Tune BD-11DX










Отзывы: