Aussie Bonza 3 Elite, Инструкция по сборке и использованию

Страница: 5 / 25

5
Step 3) Assemble Bottom Shelf to Legs:
• Place the Leg/Side Table/LegAssemblies opposite each other with the velcro patches on same
side. (FIG. 3)
• Place Bottom Shelf upside down inside the Legs. Align the bolt holes of the Bottom Shelf and
Legs. Fasten with the 1/4-20 x 1-3/8” bolts, but do not tighten completely. Note: Do not
align large hole in bottom shelf with axle holes in legs.
(9) Bottom Shelf
1 pc
Note: Do not
Align this Hole
(9) Bottom Shelf
Left Side Table
Leg/Assembly
Right Side
Table/Leg Assembly
FIG. 3
(7) 1/4-20 X 1-3/8” Bolt
8 pc
(7 ) Bolt, 1/4-20 X 1-3/8”
To reduce the risk of injury from handling or lifting:
· Assembly may require help from another person.