background image

16

Limited Warranty

MECO CORPORATION - LIMITED WARRANTY

This product is warranted to the original consumer purchaser against defects in material and 

workmanship under normal outdoor household use and correct assembly (if assembled by the 

consumer purchaser). All parts are warranted for a period of 90 days from the date of purchase. 

MECO CORPORATION DOES NOT warrant in any way the propane cylinder (see label on cylinder 

for cylinder manufacturer’s warranty.) The LP Cylinder manufacturer is responsible for the materials, 

workmanship, and performance of the cylinder. If the cylinder has a defect, malfunctions, or you 

have a question regarding the cylinder, call the cylinder manufacturer’s customer service center. 

The phone number is on the cylinder. If the cylinder manufacturer has not resolved the issue to your 

satisfaction, then call MECO CORPORATION at the customer service number listed below.
MECO CORPORATION requires proof of purchase and we suggest that you keep your receipt. 

Damages caused by commercial or institutional use, accidental or intentional damage, repairs made 

or attempted by unauthorized persons, or misuse are not covered by this warranty. If defective, the 

part or product will be repaired or replaced at the option of MECO CORPORATION without charge.
This warranty does not include the cost of any inconvenience or property damage due to failure 

of the product and does not cover damage due to misuse, abuse, accident, damage arising out 

of transportation of the product, damage incurred through commercial use, or failure to perform 

normal and routine maintenance. LIABILITY FOR CONSEQUENTIAL PROPERTY OR COMMERCIAL 

DAMAGES ARE EXPRESSLY EXCLUDED BY THIS WARRANTY. ANY APPLICABLE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS ARE LIMITED IN DURATION TO THE PERIOD 

COVERAGE OF THIS EXPRESS WRITTEN LIMITED WARRANTY. Some states do not allow limitation 

on how long an implied warranty lasts, so this limitation may not apply to you.
Deterioration or damage due to severe weather conditions such as hail, hurricanes, earthquakes 

or tornados, discoloration due to exposure to chemicals either directly or in the atmosphere, is not 

covered by this limited warranty.
No returns will be accepted without prior authorization from MECO CORPORATION. Authorization 

for return may be obtained by calling 1-800-251-7558. Handling and transportation costs for 

returning the product are not covered by this warranty and will be paid for by the purchaser. Please 

send your correspondence to

MECO CORPORATION
Attn: Customer Service
1500 Industrial Road
Greeneville, TN 37745

For reference and correspondence,

record your Serial number here.

(See nameplate on side of grill.)

Serial No.____________________________________________

Please use this number in registering your warranty and any

correspondance with MECO CORPORATION

P/N 03.6097.00

Rev. 20090917

Содержание 4280 Walk-A-Bout Gas

















Отзывы: