Aussie Fit U9000, Руководство пользователя

Страница: 6 / 20

5
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Remove four M8x20 Bolts (24), four Ø8xØ16 Flat Washers (10) from the Front Stabilizer
(6).Position the Front Stabilizer (6) in front
of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (6) onto the
front curve of the Main Frame (1) with four
M8x20
Bolts (24), four Ø8xØ16 Washers (10) that
were removed.
Position the Rear Stabilizer (7) behind the
Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (7) onto the rear
curve of the Main Frame (1) with four
M8x20
Bolts (24), four Ø8xØ16 Curve Washers
(10).
2. Handlebar Post Instllation
Remove Six M8x15 Bolts (23), Four Ø16xØ8x1.5
Curve Washers (22) and two Ø8 Flat Washer(10)
from the Main Frame (1).
Slide the Handlebar Post Cover A (19) and Handlebar
post cover B (20) onto the Handlebar Post (2)
according to the direction of the diagram.
Connect the Extension Sensor Wire (21) from the
Main Frame (1) to the Computer Extension Wire (14)
from the Handlebar Post (2).
Insert the Handlebar Post (2) onto the tube of the
Main Frame (1) and secure with Six M8x15 Bolts (23),
Four Ø16xØ8x1.5 Curve Washers (22) and two Ø8
Flat Washer(10) that were removed.