Aussie Fit E9500, Руководство пользователя

Страница: 10 / 21

5. Handlebar Installation
Attach the Rear Handlebar (7) onto the Seat Support
Bracket (5) with two M8x50mm Bolts (10), two Ø8
Spring Washers (11) and two Ø8xØ16x2.0 Curve
Washers (12).
Connect the Flexible wire (43) from the Main Frame
(1) to the Hand Pulse Sensor Wires (15)from the
Rear Handlebar (7).
6. Computer Installation
A. Remove four Screw M5x10(35) from computer (63). Attach the Computer (63) onto the
Computer support (64) with four Screw M5x10(35) that were removed.
B. Remove four screw M5x15(61)
and four washer washer Ø5 (62)
from the Computer support (64).
Connect Flexible wire (43) and
Sensor Extension Wire (57) from the
Main Frame (1) to the wires that
come from the Computer (63) and
then attach the Computer (63) onto
the top end of the Main Frame (1)
with four screw M5x15(61) and four
washer washer Ø5 (62) that were
removed.