AUSSIE ECO-CLEAN VL205 Mini Скачать руководство пользователя страница 2

Aussie Eco-Clean Extractors Carpet Cleaners 

June 2011 

VL205 MINI, VL215 MAXI, VL450 

Congratulations on choosing an environmentally friendly Aussie Eco-Clean Product. 

IMPORTANT 

Before starting to use the machine, please note the following points and read these safety 
instructions. 

 

If you should discover any damage when unpacking the machine, please inform your Aussie 
Eco-Clean Distributor. 

 

Certain parts may be packed in the tank to protect them from damage.  These should be 
removed before the cleaner is put into use. 

 

The supply voltage must be 240V. 

1.

 

SAFETY INSTRUCTIONS 

1.1

 

Recommended Usage 

This machine is designed for professional cleaning according to these instructions, in 
particular for the removal of types of dust which may be dangerous to health (not asbestos 
material). 

1.2

 

General Safety Instructions 

This machine is designed and constructed using state of the art protective devices.  
Danger can occur in spite of this, particularly in the case of careless operation or non-
compliance with these safety instructions. 

Danger – Electrical voltage/electric current 

Contact with electrical current carries the risk of electric shock with can result in serious injury or 

even death.  Never touch damaged cables.  Always switch off and disconnect the power supply 

before carrying out any work on the machine.  Replace faulty cables immediately. 

1.3

 

Improper Usage 

Any usage of the machine for a purpose not covered under the “Recommended Usage” or 
previously agreed in writing is not permissible.  The use of the machine in an 
unserviceable condition or not in compliance with the following is prohibited: 

 

Protective devices must not be removed or bypassed. 

 

Any conversion or modification of the machine is not permitted. 

 

Defective supply cables are only to be replaced by original cables. 

 

Coupling elements between mains supply and/or extension leads must be at least 
splash-proof. 

1.4

 

Operator Responsibility 

It is the responsibility of the operator to ensure that: 

 

The machine is used only by personnel who have been instructed in its handling and 
who are authorised to use it. 

 

The recognised occupational safety regulations are observed. 

 

Any further national or internal company regulations are observed. 

 

All users are acquainted with the safety regulations and trained in the use of the 
specific machine. 

 

Responsibility for the operation, maintenance and repair of the machine is clearly 
assigned and observed. 

 

Faults and damage are immediately notified to the Authorised Service Agent of Aussie 
Eco-Clean. 

 

The operator is advised to wear proper soled footwear when using the unit. 

Содержание VL205 Mini

Страница 1: ...alcum powder or materials of similar consistency can cause clogging of filter with resulting overheating of the machine and possible motor burn outs We suggest for handling materials of this type a Microweb filter used in conjunction with a suitable Aussie Eco Clean paper bag vacuum cleaner insert should be used This will help to protect your machine Please note overheating caused by handling fine...

Страница 2: ... Never touch damaged cables Always switch off and disconnect the power supply before carrying out any work on the machine Replace faulty cables immediately 1 3 Improper Usage Any usage of the machine for a purpose not covered under the Recommended Usage or previously agreed in writing is not permissible The use of the machine in an unserviceable condition or not in compliance with the following is...

Страница 3: ... may enter the unit and damage the motors If using a foaming cleaning solution add defoaming agent to recovery tank and empty regularly It is vital that the foam does not reach the motor head Never allow the liquid to exceed maximum level in recovery tank 2 OPERATION 2 1 Assembling Your Machine Open the clasp and lift off the suction head Take the accessories out of the tank Replace the suction he...

Страница 4: ...otor faulty Replace Pump not operating because valves are dirty or stuck Remove strainer in solution tank and flush out pump with clean water Pump faulty Replace Pump fails to spray Pump overheated thermostat has tripped Wait for pump to cool down Irregular spray pattern Nozzle partly blocked Clean Wrong or worn nozzle Fit new nozzle Insufficient operating pressure Detergent tank empty Fill tank R...

Отзывы: