manualshive.com logo in svg

Ausrv LX, Руководство пользователя

OBDLink LX - высококачественный сканер для диагностики автомобилей. Посетите manualshive.com, чтобы бесплатно загрузить "Quick Start Manual" и другие руководства. При помощи нашего оборудования вы сможете легко и быстро выявить проблемы и провести необходимые ремонтные работы.

Поделиться
Скачать
background image

www.marketdirect.com.au   

    

Ph: 1300 494 494

7

Jacking Your Camper

 

Your trailer is fitted with purpose built jacking points and from January 2021 supplied with a suitable jack. An 

appropriately rated bottle jack is an acceptable alternative, however when using the jacking point beneath the 

trailing arm ensure the jack is of a retracted height that will fit under the jacking point when the tyre is deflated. A 

suitably rated “High Lift” jack may be used on the jacking points on the side of the body behind the wheels provided 

it has the correct positive engagement fitting to match the trailer.

To ensure safe usage the following must be followed:

• 

The jack is to be used on level firm ground wherever possible.

•  The wheels of the trailer should be chocked, and no person should remain inside the trailer whilst it is being 

jacked.

•  No person should place any portion of their body under a trailer that is supported by a jack.
•  The trailer should be attached to the towing vehicle whilst being jacked.
•  When performing maintenance ensure suitably rated jack stands are used.  

Do not rely on the trailer being supported by the jack. 

Under the chassis

Содержание LX











































































Отзывы:

Нет отзывов

Похожие инструкции для LX

Бренды по названию

Популярные бренды

Загрузить еще бренды