4
3.3 Control Panel Operation
Plug the car fridge to a AC 110V power source by the adapter, or DC 12V power
source of the cigarette lighter socket in a car, the car fridge will start to work
automatically. Factory default setting is displaying Fahrenheit degree, ECO mode, and
batter protection at H level.
Three seconds without any operation, the control panel will automatically locked. In
order to set your desire temperature, or change the work mode, or battery protection
level, you must touch and hold the
Unlock Button
for three seconds to unlock the
panel firstly, the lock icon in the display will disappear, then you are allowed to set
your desire temperature, or mode, or battery protection level accordingly.
Touch and hold the
Power Switch
for three seconds to turn off/on the fridge.
Touch the
Setting Button
lightly, you will switch the work mode between MAX and
ECO. MAX mode means fast cooling, and it will consume a lot of energy from battery;
ECO mode means energy saving, it will not consume as much energy but it can not
reach your desire temperature fast.
Touch and hold the
Setting Button
for three seconds, the wording H, M, L wording
below the battery icon starts flashing, then touch the Setting Button lightly you will
switch the battery protection level between H, M, and L, which means High, Middle
and Low level respectively. When connecting to the car battery, the battery icon in the
display will change its status to indicate the car battery
’s electric quantity.
Setting Button
Temperature Up Button
Temperature
Down Button
Unlock
Button
USB
Port
Temperature Display
Power Switch
