Vetec SPM24
ENGLISH
BLUSPM24
11
13. Work process pressing
Th e pressing process is carried out automatically on pressing the start/stop button [4] on the
handle. Th e resulting connection is permanent and longitudinal force-locked.
Th e operation can be interrupted
1. during the
initial phase
by releasing the start/stop button [4]
2.
at any time
by pressing the reverse button [5]
Having interrupted
the pressing process, the connection can be pressed once again if form
and position of the Pressfi tting connection part engaged have not been changed, especially in
radial direction.
14. Maintenance instructions
After usage crimping tool must be cleaned and stored in a dry place. Th e power pack and bat-
tery charger must be protected from humidity and foreign materials. Principally the equipment
does not require maintenance.
After the previously set processes are completed it is necessary to take the
crimping tool to the technical assistance service for inspection to guarantee
perfect operation and increase the lifetime of the machine. Th e customer is
not authorised to perform maintenance.
4
5
SPM24
