SECTION 2
How to connect a slave amplifier to your jukebox.
Should you wish to take a LINE LEVEL (audio standard level) output to an external amplifier, connect a
screened pick up lead from the area denoted in fig 4
(
O
Line Level Output (slave)
(A) NON Diamond Pack jukeboxes
make the following connections to your amplifier.
At the connection point denoted in Fig 4 (A)
Pin 3 = Signal Left
Pin4 = Ground
Pin 5 = Signal Right
The pins are identified in WHITE PRINT on the circuit board.
(B) Jukeboxes fitted with a Diamond Pack Lighting system.
make the following connections to white spring terminal connectors as shown in Fig4 (B).
SL = Signal Left
GND = Signal Ground
SR = Signal Right
The pins are identified in WHITE PRINT on the circuit board.
JUKEBOXES FITTED WITH A
DIAMOND PACK LIGHTING
SYSTEM -
THE SLAVE OUTPUT IS
LOCATED HERE SEE BELOW
FOR DETAILS. (B)
JUKEBOXES NOT FITTED
WITH A DIAMOND PACK
LIGHTING SYSTEM -
THE SLAVE OUTPUT IS
LOCATED HERE - Please note
that on a NON DP machine this
connector will be empty. SEE
BELOW FOR DETAILS (A)
A
B
FIG4
www.aus.at
