www.auruslocks.com
C. Lock and unlock using card and password
Use Password to Unlock
For the first time
input the default factory password “1234+ OK” or input the factory default
management password “1OK”
You will hear a beep and the green LED
flashes.
The lock will unlock.
The Latch will come out automatically after 5s to lock.
Note: - in case of wrong password, you will hear 3 beeps signaling the wrong passwords.
In case of low voltage/battery the lock show this sign
The user and the management password cannot be same.
Use Card to Unlock
Show the registered card near the card inductive zone icon
.
You will hear a beep and the green light
is on.
The lock will unlock.
Note: - in case the card is unverified, you will hear 3 beeps.
D. How to Change Management password.
Input the current management
password “12 C’’
You will hear a beep and the green light
flashes quickly
Enter the new Management password you wish to set
P
ress “Ok”
You will hear a beep implying that you have successfully changed the password.
Verify the working with the new password while the drawer/cabinet is open.
E. How to Change User password.
Input the current user password “1234 + C’’
You will hear a beep and the green light
flashes quickly
Enter the new user password you wish to set
Press “Ok”
You will hear a beep implying that you have successfully changed the password.
Verify the working with the new password while the drawer/cabinet is open.
IMP: - Check the locking and unlocking of the lock while the
DRAWER/CABINET IS OPEN. The Pin should consist of 4-15 digits.
