aurum INTEGRIS CDP Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 24

aurum INTEGRIS CDP Скачать руководство пользователя страница 8

7

Back Panel Features and Definitions

1-4 Mains Power Panel

The Integris CDP is designed for use with all major AC
power systems. The unit has built-in RFI filtering for
superior performance.

1. Mains Power Inlet

A power cord with an IEC 10-15Amp female plug is
required to connect AC power to the Integris CDP. We
recommend quality aftermarket power cords and direct
connection to a quality AC outlet for best performance.

2. Power Switch

The mains rocker switch illuminates in the On position.

The mains switch may be used to isolate all of the Integris
CDP’s internal circuits from AC power.

3. Mains Power Fuse –

¼

A

The fuse is a 0.25 x 1.25 inch slow-blow type rated at
1/4Amp/250V. Replace only with the same type and

value.

4. Voltage Selector

Confirm that the voltage selector is set to the nearest

standard voltage in your area. All products should be
delivered preset to the correct voltage but exceptions

can occur. Do not connect power until you are certain
of the correct voltage setting.

5-9. Analog Preamp Inputs

The analog preamplifier section of the Integris CDP has
five line-level buffered Inputs. Highest quality
components are used to allow external sources to
achieve their maximum potential.

5-7. Unbalanced Inputs 1-3

These three inputs accept signals via unbalanced RCA-
equipped interconnect cables, the most common type

in use. The Integris CDP’s RCA jacks are premium high
performance components from cabling specialist

Cardas

Audio

.

8-9. Balanced Inputs 1-2

These two inputs accept signals via balanced XLR-
equipped interconnect cables.

10-14. Digital Inputs

The Integris CDP has five digital inputs that accept PCM
(pulse code modulated) signals from 32kHz-192kHz at 16-
24 bit word length for two-channel playback. Examples
of these sources include CD transports, DVD-Audio, DAT
decks, and many PC-based applications. All digital

inputs are routed through the Quantum resampler and
Delivered to the onboard DAC (digital to analog
converter) at a sample rate of 24 bit/192kHz.

Switching off power will reset all user-

configurable operating parameters to
factory default or to the last saved user-
settings, if present.

«
...
6
7
8
9
10
...
»

Содержание INTEGRIS CDP

























Отзывы:

Нет отзывов