Aurora TAVIS TAV-BX1, Руководство пользователя

Страница: 2 / 52

ii
USERS GUIDE
www.auroramm.com
SAFETY INSTRUCTIONS
Please review the following safety precautions. If this is the first time using this model, then read this manual before
installing or using the product. If the product is not functioning properly, please contact your local dealer or Aurora for
further instructions.
The lightning symbol in the triangle is used to alert you to the presence of dangerous voltage inside the product that may
be sufficient to constitute a risk of electric shock to anyone opening the case. It is also used to indicate improper installation
or handling of the product that could damage the electrical system in the product or in other equipment attached to the
product
The exclamation point in the triangle is used to alert you to important operating and maintenance instructions. Failure to
follow these instructions could result in injury to you or damage to the product.
Be careful with electricity:

Power outlet : To prevent electric shock, be sure the electrical plug used on the product power cord matches the
electrical outlet used to supply power to the Aurora product. Use only the power adapter and power connection cables
designed for this unit.

Power cord : Be sure the power cord is routed so that it will not be stepped on or pinched by heavy items.

Lightning : For protection from lightning or when the product is left unattended for a long period, disconnect it from the
power source.
Also follow these precautions:

Ventilation : Do not block the ventilation slots if applicable on the product or place any heavy object on top of it.
Blocking the air flow could cause damage. Arrange components so that air can flow freely. Ensure that there is adequate
ventilation if the product is placed in a stand or cabinet. Put the product in a properly ventilated area, away from direct
sunlight or any source of heat.

Overheating : Avoid stacking the Aurora product on top of a hot component such as a power amplifier.

Risk of Fire : Do not place unit on top of any easily combustible material, such as carpet or fabric.

Proper Connections : Be sure all cables and equipment are connected to the unit as described in this manual.

Object Entry : To avoid electric shock, never stick anything in the slots on the case or remove the cover.

Water Exposure : To reduce the risk of fire or electric shock, do not expose to rain or moisture.

Cleaning : Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

ESD : Handle this unit with proper ESD care. Failure to do so can result in failure.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is