Aurora Reax RXT Series, Быстрый старт

Страница: 7 / 14

In the ‘Network Settings’ page, you will see options to enable or disable DHCP. Ask your Network Administrator
and/or Control Systems Programmer which solution is best in your application. There are certain advantages of
disabling DHCP (e.g. use of device as remote host, implicit agreement on a certain range of IP addresses).
Scenarios where it is best set as ‘Disable’ would be for instance using one of the control units as a remote host or
having blocks of reserved addresses for certain devices. In the event of a power loss, the unit may be set to a
different IP if DHCP is enabled.
If the application is on an open network, ask your Network Administrator for appropriate IP ranges to minimize
network conflict. Click ‘Submit Changes’ when parameters are entered correctly.
Upon successfully creating an interface using our companion software Core Studio, you can redirect the kiosk
homepage by typing ‘http://localhost/index.html’. Alternatively, you can point the kiosk to another page on the
network by typing the address in the text box (e.g. ‘http://192.168.2.11/index.html’).
6