Aurora PVI-3600-OUTD-UK-F-W oper, Инструкция по установке и эксплуатации

Страница: 39 / 63

Installation and Operator’s Manual Page 39 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
Message
Warning
Type
Error
Type
Description
Wind Low W001 // Input Voltage under threshold
Input OC // E001 Input overcurrent
Wind Low W002 // Wind Energy low
Input OV // E002 Input Overvoltage
Internal Error // E003 SW error
Bulk OV // E004 Bulk overvoltage
Internal Error // E005 Communication Error
Out OC // E006 Output overcurrent
Internal Error // E007 IGBT saturation
Internal Error // E008 Bulk undervoltage
Internal Error // E009 Internal Error
Grid Fail W003 // Grid Fail
Internal Error // E010 Bulk Low
Internal Error // E011 Ramp Fail
DC/DC Fail // E012 DcDc error revealed by inverter
Wrong Mode // E013 Wrong Input setting (Single
instead of dual)
Over
Temperature
// E014 Overtemperature
Capacitors Fault // E015 Bulk Capacitor Fail
Inverter Fail // E016 Inverter fail revealed by DcDc
Internal Error // E017 Start Timeout
Ground Fault // E018 I leak fail
Internal Error // E019 leak Sensor fail
Internal Error // E020 Self test error 1
Internal Error // E021 Self test error 2
Internal Error // E022 Self test error 4
Internal Error // E023 Dc-Injection Error
Grid OV W004 // Grid overvoltage
Grid UV W005 // Grid undervoltage
Grid OF W006 // Grid overfrequency
Grid UF W007 // Grid underfrequency
Z Grid HI W008 // Z Grid out of range
Internal Error // E024 Internal Error
------------------- // E025 Riso low (log only)
Internal Error // E026 VRef Error
Internal Error // E027 VGrid Measures error
Internal Error // E028 FGrid Measures error
Internal Error // E029 ZGrid Measures error
Internal Error // E030 ILeak Measures error
Internal Error // E031 Wrong V Measure
Internal Error // E032 Wrong I Measure
Internal Error // E033 Undertemperature