2
b) Enter IP address 169.254.1.1 of IP controller's LAN1(AV) port.
c) Enter
username
(admin by default) and password (admin by default).
4. In the web configuration page, choose Scenes > All Devices.
5. In Matrix area, the table of TX/RX will appear with TX units across the top
and the RX down the left hand side. Press the box that links each TX/RX to
perform matrix switching.
Configuring Video Wall
After finishing matrix switching, you can do as follows.
1. On your computer, start PC Configurator then click Search button to search
for TX and RX.
2. Create a scene.
a) In Scene area, click Create button.
b) In the dialog box, set scene name and size, and then click OK.
3. In Devices list, click and drag RX to the scene table to assign RX.
4. In Devices list, click and drag TX to the assigned RX positions in the scene
table to perform matrix switching.
5. In the scene table, select multiple RX and choose Combine from the
right-click menu to create a video wall.
Performing Visual Operations
After finishing matrix switching or video wall, you can do as follows.
1. Connect a wireless router's LAN port to the switch with an Ethernet cable.
2. Configure wireless network settings in iPad.
a) Enable WLAN in iPad.
b) Connect iPad to your wireless router.
c) Click the connected wireless router name.
d) Click Static.
e) Set IP address as 169.254.1.21, subnet mask 255.255.0.0, but leave
router and DNS blank.
3. Start VisualM client. It will automatically connect to IP controller and display
visual operation interfaces.
Changing TX/RX's IP Addresses, Alias and Working
Parameters
For more information, see user manuals of IP controller and PC configurator.