Aurora IPX series, Руководство пользователя

Страница: 10 / 49

6
User Guide
SOFTWARE OPERATION
Launching IPX Manager
With a properly installed IPX Manager there will be an Icon for the IPX Manager as shown below. Launch
the application by double clicking or single clicking (based on mouse settings).
The default starting position will appear which is in an unconnected state which is why no units will show
at this time. Note the IPX Manager firmware revision number will appear in the top header bar. The view
being shown is Horizontal view. Under the View tab it can be changed to Vertical view so objects can be
dragged left to right instead of top to bottom.
It is also important to note if it is planned to have a specific unit switch between Encoder and Decoder
mode the setup for the unit must be done once in both Encoder and Decoder mode so it is saved
accordingly.