3
User Guide
Front DXE-USB-H1, DXE-USB-D1
DXE-USB-H1 Front
Power LED
– Lights solid green when unit is powered.
Status LED
– Blinks green when processor is running.
ES1 & ES2 LEDs
– Lights red when setup button is pushed to indicate what mode of
operation the unit is in. Currently ES LEDs are used for distance settings.
Setup Button
– Use a paper clip or object of similar size in the hole to push the button. For
every push the ES LEDs will change its indication for the current mode of operation.
DXE-USB-D1 / D1P Front
Power LED
– Lights solid green when unit is powered.
Status LED
– Blinks green when processor is running.
ES1 & ES2 LEDs
– Lights red when setup button is pushed to indicate what mode of
operation the unit is in. Currently ES LEDs are used for distance settings.
USB1 LED
– Lights red when a USB device is plugged into USB port 1 and communicating
with PC.
USB2 LED
– Lights red when a USB device is plugged into USB port 2 and communicating
with PC.
Setup Button
– Use a paper clip or object of similar size in the hole to push the button. For
every push the ES LEDs will change its indication for the current mode of operation.
Note: DXE-USB-D1P front silk screen is same as D1. The difference is on the rear as it has a 24v DC
power jack whereby the D1 does not. The D1P model is primarily used with the DXW-2EUH.
