5
ENGLISH
OPERATION
CONTINUED NEXT PAGE
FIGURE 2
Control Switch
Using the switch located on the unit, select one of the following
settings by sliding the switch either left or right. (FIGURE 2)
I
AUTO / ON:
This setting allows the shredder to be automatically started by inserting paper
into the feed slot. Always feed the paper in as straight as possible. When the paper has
passed through, the shredder will automatically stop.
O
OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that
you leave the shredder in the OFF position whenever the shredder is unattended or not in use.
Reverse:
In the unlikely event of a paper jam, the reverse setting can be used to help clear
the cutters of paper that did not pass through. Never attempt to clear a jam by using the
reverse function until you have emptied the wastebasket.
Forward (Jam Remover):
The forward setting can also be used to help clear the cutters in
the event of a paper jam. This allows to manually activate the shredder into cutting mode.
Содержание AU1880XA
Страница 2: ......