Aurora AU 142, Руководство пользователя, Страница: 10 / 12

AU 142
Espresso COFFEE MAKER
ENG
10
ESPRESSO
The process of making cofee is to pass hot water
through the cofee grounds under high pressure
steam.
Open the lid of the water tank, for this, turn it
counterclockwise.
By using volumetric lask Pour the required
amount of cold water: two or four cups.
Close the lid of the tank.
With a spoon, pour the required amount of
ground cofee in the ilter and not pressed cofee
latten it.
Insert the ilter holder.
Holder insert in the machine to handle holder
coincide with the position «INSERT» and turn
counter-clockwise, so that the handle is in posi-
tion «LOCK».
Place a volumetric lask stand. Ensure that the
hole in the cover matches the volumetric lask to
the holder.
Connect the brewer to the power supply.
Set the mode selector to the while the
indicator light should light work.
CAUTION!
During operation, do not touch the
steel parts of the cofee maker – they are hot.
Be careful – the steam coming out of the nozzle
is hot.
DO NOT! Remove the lid of the water tank during
operation cofeemakers.
After the end of cofee, with the switch, turn of
the cofee maker, push the switch to «OFF», then,
remove the lask from the stand and pour the cof-
fee into the cup.
The ilter can be washed without removing it
from the holder. To do this, secure it with a clamp.
PAUSE FUNCTION
This function allows you to stop the cofee maker
when making cofee. Set the switch to “PAUSE”,
the brewing process stops, you can remove the
lask and pour the cofee into the cup. Then it is
necessary to put in place the lask and continue
to make cofee, the switch set to
.
CAPPUCCINO
Cappuccino espresso used with the addition of
hot milk foam.
Pour into a cup you need to prepare the amount
of milk foam. The cup must be large enough be-
cause the foam three times by volume of milk.
Repeat all the steps in making espresso.
Lower steam nozzle into the milk and set the
mode selector switch to the
Exiting the nozzle steam starts to foam milk. To
improve the efect, move the cup upside down.
Continue frothed milk to the desired result.
After the formation of a suicient amount of
foam set function switch in the “OFF” position
and unplug the appliance.
Pour the cofee into the cup and put it on top of
the milk foam.
WORK