Aurora AU 025, Руководство пользователя

Страница: 9 / 12

Remove Protective Cover work surface with iron and damp cloth.
Some parts in the manufacture of iron blurry, and when you first turn on a little iron can
smoke. For some time after the start of the smoke disappears.
Before use, carefully read the instructions for use.
The device is intended for household use only.
Do not use for industrial purposes.
Before the first turn the unit make sure that the
power supply or not your device, shown in the
table of technical characteristics of the voltage
in your outlet.
Do not use outdoors and in rooms with high
humidity.
Do not immerse the appliance or cord in water
or other liquids.
When you disconnect the device from the mains,
do not pull the cord, keep your hand and pull
the plug.
Avoid touching the hot surface of the cord and
sharp edges.
Prior to filling or emptying the water tank, and if
you do not use the device, turn off the unit from
the outlet.
Do not use with damaged cord or plug, or after
the instrument has plunged into the water or
damaged in any other way.
To avoid electric shock, do not attempt to
disassemble or repair the instrument.
For repair and adjust the iron contact the nearest
service center.
Be especially careful when using the device in
close proximity to children.
Do not allow children to use an iron.
Never leave the appliance unattended and
ironing board.
Place the iron ironing board carefully, do not hit
the device during use of the working surface of
the iron. Be careful not to touch the metal parts
of iron.
Avoid ironing on the zippers, rivets, etc., as they
may damage the work surface.
It is not iron on the metal or rough surfaces.
CAUTION:
To avoid overloading the power
supply, do not use the iron in conjunction with
other energy-consuming appliances.
BEFORE FIRST USE
SAFETY PRECAUTIONS
9
AU
025
Праска \ Утюг \ Iron
ENG