manualshive.com logo in svg

Aurora AOne, Техническая документация

Поделиться
Скачать
Aurora AOne Скачать руководство пользователя страница 29

29

When do I need to press the factory restore button on my AOne Hub?

By pressing the factory restore button, the AOne Hub will be restored to factory default and will
discard all settings such as: Devices, Spaces, Schedules, etc. We strongly recommend not to press
this button unless you have severe problems and you have contacted customer support. A factory
reset will not release (un-pair) a Hub - if necessary, this should be done before the reset procedure is
executed.

How to perform a factory reset?

Flip the AOne Hub over to locate the small pin hole in the recessed
section.

Using a paperclip (or similar), press and hold the reset button for 15
seconds or until all 4 lights turn solid (This indicates data has been
cleared)

Release the button and allow the Hub to reboot
(the right green indicator will start blinking rapidly).

The flashing green start up sequence can take anything between 3-5 minutes, so please do not
disconnect the Hub during this time.

Once the AOne Hub has two solid green lights (the first and the last) sign in to the AOne app. After
the Hub has successfully synchronised, you will then need to continue with Device pairing.

Please make sure that your Hub has no flashing red exclamation mark.

The flashing red exclamation

mark shows issues with the Internet connection.

How to know when to upgrade your AOne Hub?

Once a new firmware is released, you will be notified with a popup dialog. During the update you will
see the LEDs on the front of the Hub flash several times. When it’s finished updating, your Hub will be
automatically restarted.

We highly recommend updating your Hub as soon as you receive a message in the AOne Apps letting
you know that there is a new firmware available. Every new firmware version introduces new
enhancements that will improve the performance of your hardware.

Can I replace the Ethernet cable supplied with the AOne Hub?

The supplied Ethernet cable is a standard network cable and can be replaced by any Ethernet cable
(CAT5, CAT5e, CAT6, CAT6e).

Содержание AOne































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды