TVP-500F Installation Manual
Tune Channels (Manual Tuning)
-- Scans for valid signal presence and “remembers” which
channels are valid and which are not. Note that before this operation TVP-500F
must be connected to RF-antenna or cable TV.
Add/Remove Channels
-- Allows user to add or remove channels (edit the “validity mask”)
manually.
Map A/V Input to Channel
-- Allows user to make an association between a channel number and the
AV inputs.
Since the TVP-500F allows to attach several additional video signal sources to its AV inputs, to
facilitate user selection of these inputs TVP-500F maps some additional “channel numbers” to its AV
inputs. So when these “channels” are selected, the TVP-500F switches to the respective AV input. These
reserved channel numbers are based on the values selected in the service menu and could be setup in
many different ways as shown below.
26 - Composite video IN (Default is 126)
97 - S-Video IN (Default is 127)
108 - RGB+HV IN (Default is 128)
2 - YPbPr IN (Default is 129)
When switching to those channels, the appropriate input will be selected and displayed instead of the
normal TV channel.
13
