5
1.
Connect your HDMI source device to the HDMI IN port.
2.
Connect your DVI display or projector to the DVI-I OUT port.
3.
Connect your S/PDIF AV receiver to the S/PDIF RCA port.
4.
Connect your PC speaker to the Stereo 3.5mm earphone jack.
5.
Power up the ASP-HTD.
* S/PDIF format is dependent upon the embedded digital audio part in the input HDMI stream. The S/PDIF receiver
must be able to recognize the input S/PDIF format. This ASP-HTD only separates the digital audio in HDMI stream,
and bypasses this decoded audio to the output.
* The function of the rotary switch is reserved and please keep the rotary switch at 0.
1.
Power up the ASP-HTD. Connect DVI display to the DVI OUT.
2.
Turn the rotary switch counterclockwise [
4
] from 0 to 7.
3.
The green LED will flash a few times to indicate the EDID is learned.
4.
Turn the rotary switch clockwise [
3
] from 7 to 0. DO NOT let the rotary switch arrow pass 6, which will erase the
just learned EDID and reset to default EDID.
1.
Analog stereo audio output can merely support 2-channel audio. This version does NOT support 8-channel analog
audio applications.
2.
S/PDIF audio output supports main 2-channel audio output only.
Notice
EDID Learning
