14
User Guide
Software
Software Control Menu
1. Scan button
Serial Port Scan
Press
Scan
button, the machine will scan the all com
port and show them.
Select the RS232 serial port connected to the
machine. And set device ID 255 is for all device.
Only the same device id or 255 can get the
command you sent.
Press
OK
. Get the new status from the machine you
select.
2. Setting button
Press
Get
button to read back device ID.
Press
Set
button to write device ID.
3. Linkage button
Press
Linkage
button to read back all status.
4. Open/Close button
Press this button to close or open COM port.
HDMI input
source
selection
mapping
area
HDMI
output
port
selection
mapping
area
Status Indicator
