~
10
~
blank for 2~3 seconds and recover again. The ASP matrix switcher will send out a RS232
feedback command of “EDIDMOn.” or “EDIDMInit.”.
EDID management by buttons
When you need to recover the ex-factory default EDID data set, you can send the RS232
command or press the buttons of the front panel/IR remote to make it work.
Erase and Refresh the EDID data
Keep pressing the arrow button “<-” for 30 seconds all the LED of “<-” will be on for 10
seconds. It then enters the EDID setting status.
Pressing “Input 2” button and “Undo” button all the outputs will be blank for 3 seconds, to
carry the “EDIDMOn.” command to refresh the EDID.
EDID restore to factory default
Keep pressing the button “<-” for 30 seconds and all the LED of “<-” will be on for 10
seconds. It enters the EDID setting status.
Pressing “Input 1” button and “Undo” button all the outputs will be blank for 3 seconds, to
carry the “EDIDInit.” command to restore the EDID to factory default.
