21
GB
the outdoor sensor. The relevant data is shown in the
LC-display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
-
: automatic channel change
Low battery:
If the battery symbol appears the batteries in the outdoor
sensor should be replaced as soon as possible. Please refer
to the instructions in section
Starting the outdoor sensor / chang-
ing batteries
.
Settings
ATTENTION:
Firmly touching the top of the housing will turn on the back-
light (Fig. E). Five seconds after releasing it the display backlight will turn
off again.
Please note, the base station does not respond to two buttons being pressed
at once. Hence, if the unit does not respond to a button being pressed, you
are probably also pressing the SNOOZE/LIGHT field. Release when this
occurs!
Basic settings
Press and hold the SET/HISTORY button
13
for 3 seconds to change
the basic settings.
Pressing the UP button
14
or the DOWN- / -button
15
allows you
to now change the respective flashing value.