
15
GB/IE
-
e
Operation
Do not use the clock in reinforced concrete buildings,
e. g. airports, high-rises, factories or basements. This
can seriously disrupt reception of the radio signal.
Do not start radio reception in a moving vehicle, e. g.
car or train. Reception of the radio signal by the device
can disrupt the vehicle electronics.
Do not expose the clock to temperatures below --20 °C
for any length of time.
Setting the radio-controlled alarm
clock into operation
Remove the protective foil before first use.
Open the battery compartment
20
on the back of the
clock.
Insert two AAA batteries.
Note:
Make sure that the polarity is correct when
you insert the batteries. This is indicated in the battery
compartment.
Close the battery compartment.
86663_aur_Funkwecker_Content_LB3.indd 15
21.01.13 13:25