10 GB/IE/NI
Press the TEST button
20
. The light alarm clock will scan
the settings for the selected alarms. The advance alarm
will not be run. Instead, the light will be adjusted to the
set value, then the alarm will sound.
Lighting
Press the SNOOZE button
15
. A white guide light will
appear in the illuminated panel
1
.
Press the SNOOZE button again to switch the light off
again.
The visual alarm will also work when the light is on. The light
will then be deactivated and will reappear after the alarm.
Mood light
The mood light function activates a dim coloured light in the
illuminated panel
1
.
Press the LIGHT+ button
17
to activate the mood light.
Repeatedly press the LIGHT + button
17
to increase the
brightness 1–5, and to switch it off. Or press the LIGHT–
button
16
to change the colour scale as follows C1-C9:
Mood light off: →
red
→
orange
→
yellow
→
cyan
→
green
→
Sky blue
→
Purple
→
automatic colour
change
→
colour chosen during automatic colour
changing
Activating the mood light does not impact the functionality
of the visual alarm. The mood light will be switched off and
on again after the alarm.
Battery operation
The inserted batteries are only to backup the clock display
and alarm function. In the event of a power failure the light
alarm clock will automatically switch to battery mode.
The clock will continue running in battery mode. To save en-
ergy, only the electronic alarm will sound. All light functions
and the radio are non-operational.
Once power returns via the low voltage jack
8
, all
functions of the light alarm clock will be available again.
Replacing Batteries
Batteries should be replaced at least once a year to ensure
reliable function of the light alarm clock.
To do so, open the battery cover
7
on the underside
of the light alarm clock by pressing the latch in the
direction of the arrow and remove the old batteries.
Insert three new batteries type AA, 1.5 V. When insert-
ing the battery ensure the correct polarity. This is shown
in the battery compartment.
Close the battery compartment cover.
Cleaning and Care
Unplug the mains supply
27
from the socket before
cleaning the device.
The device should only be cleaned on the outside with a
soft dry cloth.
Troubleshooting
The device contains delicate electronic components.
For this reason it is possible that it can be disrupted by radio
transmitting equipment in the immediate vicinity. Electrostatic
discharges can lead to malfunctions. In this case, press the
RESET button
5
. This will reset the light alarm clock and
perform a brief test of the LC-display
3
. The light alarm
clock is then ready for use again.
Please note, resetting will erase all settings.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local authorities for information on
how to dispose of the product at the end of the
product‘s life.
