11
GB/IE
Clock mode
In Clock mode, the time is shown in the top field of the display
1
.
The bottom two fields show the stopwatch time (Fig. C).
Setting the time
In Clock mode, press and hold down the CLOCK (TIMER) key
5
for 3 seconds. The top field of the display
1
flashes.
Press the SEC key
4
, the MIN key
3
or the HR key
2
to
change the displayed values for seconds (SEC), minutes
(MIN) or hours (HR) in steps.
TIP:
Press and hold the key to make the numbers change
more quickly.
Press the CLOCK (TIMER) key briefly, in order to confirm the
set time. The time does not flash.
Press MIN (12/24 HR) key
3
to switch 12 or 24 HR mode.
Activating the stopwatch
In Clock mode, press the START / STOP (MEMORY) key
6
.
The stopwatch begins in the bottom section of the display
1
and shows the expired seconds, minutes and hours. The hun-
dredths of a second are counted in the middle section of the
display.
Press the START / STOP (MEMORY) key to halt the stopwatch
or to reactivate counting.
When you have halted the stopwatch, you can reset it to 0 by
pressing the CLEAR key
7
.