Auria EQ276W-1, Руководство пользователя

Страница: 8 / 36

SET-UP YOUR MONITOR: STEP FOUR
Connect your monitor to a power source.
1. Connect the output cable from the AC Power Adapter (“The Brick”) to the
DC Power In connector (flat side of connector towards the cabinet rear) on the
monitor.
2. Plug in the IEC Power Cord to the input side of The Brick and your
100/120V or 220/240V AC grounded power outlet using the provided power
cord. NOTE: using the device with voltages other than those listed above may
cause permanent damage to the monitor. It is strongly recommend that you
use a power strip with a surge suppressor.
NOTE: It is suggested that you leave the AC Power Adapter (The Brick) plugged
into 120 VAC source all of the time (do not use the switch on the power strip to turn
the monitor On/Off). Please use the Power Button on the monitor to turn On/Off.
When the monitor is off, the Brick goes into “stand-by” mode (burns 1 or 2 watts)
and the Green LED remains lit.
6