9
Fingerprint and iButton Installation
4-2.
1. Insert Fingerprint and iButton module in
place and fasten the screws (M3x2) on
the back to secure the module.
Fingerprint and iButton module can be installed to either side of the system. Choose
one side and follow the steps below. Before the installation, please open the cable
cover firstly as steps described in chapter 3-1
2. Connect the iButton cable to the RJ45 COM
port on the I/O panel, and connector the
Fingerprint cable to the USB port.
3. Close the cable cover and fasten
screws (x2). Make sure the cables are
threaded through the cable hole on the
system.
iButton
Fingerprint