Aurender X725, Руководство пользователя

Страница: 9 / 18

-9-
1.6. Internal Components
Figure 3. X725 Internal Components
The Front board, Linear PSU board, Audio board, Power amp module
and Rear board are located within the X725 as shown in Figure 3.
Table 3. X725 Internal Components
AC power is sent from (6) to (2) by a connecting cable (CABLE_X725-
1-M1), and then from (2) to (5) by another cable (CABLE_X725-1-J2 for
220V, or CABLE_X725-1-J1 for 110V).
The digital signal from the USB and SPDIF inputs are sent from (4) to (3)
by a connecting cable (CABLE_X725-3).
The FCC cable (CABLE_X725-2) is used to connect (1) to (3) in order
for the LED light to turn on when there is a signal received from the IR
sensor or when the volume is changed.
1. Introduction
X725 Internal
Front board
Linear power supply board
Audio board
Rear board
Power amplifier module
AC power inlet
Binding posts 1
2
3
4
5
6
7
1 2 3 5 4
6
7