auray RF-C12 Скачать руководство пользователя страница 8

This Auray product is warranted to the original purchaser to be 

free from defects in materials and workmanship under normal 

consumer use for a period of three (3) years from the original 

purchase date or thirty (30) days after replacement, whichever 

occurs later. The warranty provider’s responsibility with respect 

to this limited warranty shall be limited solely to repair or 

replacement, at the provider’s discretion, of any product that fails 

during normal use of this product in its intended manner and in its 

intended environment. Inoperability of the product or part(s) shall 

be determined by the warranty provider. If the product has been 

discontinued, the warranty provider reserves the right to replace 

it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, 

neglect, accident, alteration, abuse, improper installation or 

maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY 

PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR 

ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR PURPOSE. This warranty provides you with 

specific legal rights, and you may also have additional rights that 

vary from state to state.

To obtain warranty coverage, contact the Auray Customer Service 

Department to obtain a return merchandise authorization (“RMA”) 

number, and return the defective product to Auray along with the 

RMA number and proof of purchase. Shipment of the defective 

product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.aurayaudio.com 

or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group. 

www.gradusgroup.com

AURAY is a registered trademark of the Gradus Group. 

© 2018 Gradus Group LLC. All Rights Reserved.

Three-Year Limited Warranty

GG1

Содержание RF-C12









Отзывы: