26/10/21, 3:38 μ.μ.
AURATON Tucana - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-tucana-pl/
31/39
The hysteresis change mode is signaled by the flashing text
HI
. Use the
bc
buttons
to set the required hysteresis.
HI 2
- ± 0.2 ° C (factory set),
HI 4
- ± 0.4 ° C,
HI P
- PWM operating mode (chapter "PWM operating mode").
Confirm your choice by pressing
and
. AURATON Tucana will proceed to change
the next parameter.
Change the delay
The delay prevents too frequent activation of the actuating device, e.g. due to
temporary drafts (e.g. caused by opening the window).
The delay change mode is signaled by
the flashing inscription
90: SE
Use the
bc
buttons to turn the delay
on or off.
90: SE
- delay 90 seconds
(factory
setting)
0: SE
- no delay
Configuration settings
PWM operating mode
Connection diagram of AURATON Tucana
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wired temperature controller
Description of AURATON Tucana
First launch of AURATON Tucana
Introduction to programming
programming
Manual control
Vacation mode
Setting the anti-freeze temperature program
Heating device operation time counter
Temporary switch off of the relay
RESET AURATON Tucana
MASTER RESET AURATON Tucana
Configuration settings