AURATON Auration 100, Руководство пользователя

Страница: 2 / 4

SETTING THE CLOCK
In order to set the clock:
1 . Press and keep pressed CLOCK button.
2 . Then use the following buttons:
WEEK – to set a weekday,
HOUR – to set the hour,
MIN – to set minutes,
SEC – to set seconds.
Default setting of the clock operation is to display time in
24-hour mode. To switch the clock into 12-hour mode
(AM, PM), simultaneously press
MIN and SEC buttons.
PROGRAMMING
The time switch may be programmed with maximum
8 programs . Each setting is made individually.
To enter the programming mode, proceed as follows:
1 . Press PROG button.
2 . The display will show the program number icon
"1" and "ON" symbol. It means that the time of
switching on program "1" is being set.
3 . Use WEEK button to set a day (or days) of the week in
which this program is to be activated. You may select
each day individually, the whole week, working days,
weekend or every second day.
Use buttons:
HOUR , MIN (minutes), SEC (seconds) to
set precise time of program, activation.
4 . Press PROG button. The display will show
"OFF" next to the number of the program.
It means that that the time of program switching off is to
be set. Use buttons:
WEEK , HOUR , MIN (minutes), SEC
(seconds) to set the time.
5 . When switching off time is set, press PROG button, to
continue programming of the next program. For the
next program repeat the procedure described in
paragraphs
2 – 4 above.
In order to exit the programming mode, press CLOCK
button or wait 10 seconds.
ON
OFF