Auralic TAURUS MKII Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 18

Auralic TAURUS MKII Скачать руководство пользователя страница 9

9



Analog Outputs

When using as pre-amplifier, TAURUS MKII will provide high level, low distortion audio
signal to your power amplifier though its analog outputs. In STD mode, both RCA and XLR
outputs are connected together with XLR’s pin 2 as hot; in BAL mode, only XLR outputs
are active with a maximum output level at 36Vrms. AURALiC recommended you only
connecting RCA or XLR outputs at the same time for best sonic performance.

Operation

The front panel of TAURUS MKII is shown as following:

1 Power Switch

2

Volume Control Knob

3 Power LED

4

Input Control Switch

5 Output Control Switch

6

4PIN Balanced Headphone Jack

7 6.35mm Stereo Headphone Jack

Power On/Off

As soon as you have plugged the power cord, and set the AC Mains Power Switch to po-
sition 'I', TAURUS MKII will be in deep standby mode with power dissipation at about 0.1
Watt, you can power on and off the unit by pressing the tactile switch ‘POWER’ on the
from panel.

The Power LED indicates current work status of TAURUS MKII:



LED off:

Power off

«
...
7
8
9
10
11
...
»

Содержание TAURUS MKII



















Отзывы:

Нет отзывов