9
Scanning tracks
Press the button (5)
INT
for sequential playback of 10 seconds of each track.
Click again to stop scanning.
Repeat play
Press the button (6)
RPT
, to select the repeat play mode.
Shuffle play
Press the button (12)
RDM
to turn on the random play mode.
Press again to turn off.
USB
Switching folders and tracks
Press the button (13) or (14) , to move 10 tracks back or forward.
Press and hold the button (13) or (14) , to switch to the previous or
next source folder.
You can connect an external source to the 3.5mm jack on the front of the receiver
using the AurA AUX cable (optional).
AUX
Disconnecting the vehicle battery or restarting the device with the Reset button will
restore all parameters to the factory settings.
If any of the preset equalizer (EQ) modes is selected, the BASS and TREBLE
parameters are not adjustable. If within a few seconds after the selection the
parameter is not set, the device will automatically exit the setting mode and return
to the current operating mode.
Note:
When the power is turned off, all parameter settings are saved in the device's
memory.