4. Use
4.2 Adjusting the power of the
gas spring
The power with which the back
section of the mesh base is raised
and lowered is adjustable. There are
three settings:
1. light (top hole): if you select the
‘light’ setting, the back section is
easiest to push flat.
2. normal (middle hole): standard
setting.
3. heavy (bottom hole): if you select
‘heavy’, the back section comes
up with extra force.
Adjusting the spring tension
1. Lift the back section half way up.
2. Unscrew the plastic notched nut
(see fig. 4).
3. Attention: support the back
section and remove the
connecting pin (pay attention to
the plastic bearing bush in the
eyelet of the gas spring).
4. Place the eyelet of the gas spring
in the required position. The top
hole towards the mesh results in
the lightest adjustment.
5. Press the connecting pin through
the lifting arm and the eyelet of
the gas spring (pay attention to
the plastic bearing bush in the
eyelet of the gas spring).
6. Tighten the plastic notched nut
(see fig. 5).
4.3 Relocating operating side of
adjustment cord
The control ball for your mesh base
is on the right, but it can easily be
moved to the left.
1. Untie the knot A from the cord B
and remove the ball C
(see fig. 6).
GB 6
fig. 4
fig. 5
fig. 6
Содержание Match 333
