18
EN
BT CONTROL
When the tone arm set to the rest position, Bluetooth function will start
automatically. Then need to press the mode key to circle between USB/SD
and BT.
Amplifier Connection
You can listen to your new turntable using the built-in speakers, or you
may wish to connect it to your existing Hi-Fi system. Connect the “line
out” RCA ports to the “line input” on your mixer or amplifier using an RCA
cable (not supplied)
• Red plug into the right channel input
•
White plug into left channel input
Playing a record
• Open the latches on the side of the unit, then lift up the lid and be sure
to secure the arm support.
• Remove the protective cover from the stylus cartridge. (See image1.)
•
Place a record on the turntable. If required, place the 45 RPM adaptor
on the record spindle.
• Choose the desired playing speed (33, 45 or 78 rpm) by using the speed
selection switch.
• Turn on the rotary power switch (note that this also controls volume).
• Release the tone arm lock. (See image 2).
• Raise the arm using the cue lever and move the arm away from its
holder. This will prompt the turntable to start spinning automatically.
• Use the cue lever to slowly place the stylus down onto the record’s
groove.
•
If the AUTO STOP switch is set to ON, the record will stop automatically.
If it is set to OFF, the record will not stop automatically.
