14
www.auna.de
AUX
Connect external media players to the Belle Epoque‘s AUX IN, using a 3.5mm audio cable. Press BT/AUX/
PH on the front panel to select AUX mode and use your external player to operate the playback. Disconnect
the AUX cable to enable PHono or BT.
Cassette
Press TAPE to select the cassette deck function. Insert a cassette into the cassette slot. Press EJ/FF to eject
the cassette, or press the button half to fast forward.
BT/AUX/PH: Phono Deck
•
Press AUX/BT/PH to select teh shared AUX/BT/Phono channel. If an AUX device is connected, it is
"prioritized", meaning you have to disconnect any external devices to start listening to records or BT.
•
Open the dust cover of the record player. Place an LP record on to the turntable
•
Select a rotation speed (45 / 33 / 78) using the rotation speed switch.
•
Lift the tone arm using the cue lever. Lift and place the arm above the record.
•
Lower the tone arm using the cue lever and the turntable will start to play automatically.
•
Adjust the volume.
After the record has finished playing, the turntable will automatically stop when the auto stop ON/OFF
switch(9) ON; if the auto stop ON/OFF switch(9) OFF, the turntable cannot automatically stop, and need
select the auto stop ON/OFF switch(9) to OFF or manually return the tone arm back to the hold position.
BT
Press AUX/BT/PH. The Belle Epoque is in pairing mode. Make sure the phono tone arm is attached to the
tone arm holder. Activate BT on your smartphone/tablet and pair with the EPOQUE1907. You can now
stream audio via the Belle Epoque.
Remote Control
The remote control requires a type CR-2025 battery. Pull out the battery compartment and insert the batte
-
ry, minding the correct polarity (see figured).
