22
BT
Press the input selection button ( ) reepatedly to activate BT mode. Activate BT on your smartphone/
tablet. The Areal Bar appears in your list of found devices ("Areal Bar 550"). The Areal Bar automatically
searches for previously paired BT devices whenever you switch to BT mode. If a previously paired device is
found, the Areal Bar automatically pairs.
If you are prompted to enter a password, enter "0000".
Press and hold
for 5 seconds, to un-pair the currently connected BT device.
In BT mode, use the buttons
and
/
to operate the music playback.
Trouble Shooting
No Power
•
Ensure the mains plug is connected to a power supply, and
is switched ON.
•
Make sure there is power to the mains socket.
No Sound
•
When playing from the AUX input, Make sure the external
source has the volume turned up and is playing a track.
•
Make sure the volume is turned up.
•
If using the digital coaxial or optical cable connection en
-
sure the source DIGITAL output is set to PCM, LPCM, PCM
2Ch stereo or PCM downmix.
•
BT device not paired. Refer to “BT operation”.
No response from the unit
•
Unplug the power cable for 1 minute then plug back in
again.
Remote control does not work
•
Reduce the distance between the remote and main unit.
•
Check the batteries are installed correctly.
•
Replace the batteries.
•
Aim the remote directly at the Sound bar
Unit powers off after 20 minutes
•
This unit is designed to enter STANDBY mode automati
-
cally after 20 MINUTES of inactivity. Press the STANDBY
button to wake the unit.
