29
EN
FUNCTINS AND SETTINGS
Powering ON/OFF
When you first connect the unit to the mains socket, display will show the
“00:00:00”. If you can receive a DAB+ signal in your location, the unit will
synchronize to the current local time. After approximate one minute, it will
switch to STAND BY mode.
• Press the STANDBY on the unit or on the remote control to switch the
unit to ON mode.
• Press the STANDBY on the unit or on the remote control to switch the
unit back to STANDBY mode.
• Disconnect the mains plug from the mains socket if you want to switch
the unit off completely.
Note:
• When the unit is idle for approximately 15 minutes, it will automatically
switch to standby.
• Please turn the unit o completely to save energy when not in use.
Adjusting the Volume
• Turn the /– control on the unit or press the /–
buttons on the remote control to increase/decrease the volume.
• If you wish to turn the sound o, press the MUTE button on the remote
control. Press the MUTE button again or press the /– buttons
on the remote control or turn the /– control on the unit to
resume normal listening.
Manual Clock Setting
1 In Standby mode, press the CLOCK button on the remote control. The
hour digits flash on the display.
2 Press the |<< or >>| buttons to adjust the hour digits, and then press the
CLOCK button to confirm. The minute digits will flash on the display.
3 Press the |<< or >>| buttons to adjust the minute digits, and then press
the CLOCK button to confirm.
4 The time is now set.
