Remarks:
- The recording speed is 1:1 and according to the actual plying time of the CD track
- The system will create a “ Audio “ folder and then store the encoding track in it.
- The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recording, press the “ record “ button again during record mode
- Recording will be completed only entire song being encoded, if terminate the encoding
process intermediately, there is no track being recorded nor stored to the USB storage.
Copying of MP3 files
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “ Record “
button. The operation procedures is same as CD encoding as stipulate on above, and the system will
switch to copy mode only if MP3 file being read.
Phono -> MP3
• Set the function button to “ Phono “ mode and then press the “ Record “ button (15) directly.
• The LCD display with show the word “
USB
“ and then flashing, and then display “
“ &
“
“ and flashing after few seconds. Now the system is starting the encoding mode.
• Start playback at phono for the track which you want to record to USB.
• After finish of recoding, press and hold the “Record “ button (15) until the LCD stop flashing and
return to phono mode.
Track separation (by remote handset)
You can divide the recording music from phono to USB track by trace during encoding. Every time
when press the “
“ (track separation) button once at remote handset during encoding from
phono to USB, the system will generate a new track and continuous the recording. The current text
at LCD display will flashing one time, it mean the unit is creating a new track successfully.
Encoding bit rate (by remote handset)
You can select the desired bitrate during encoding from CD or phono to USB, the selectable range from
32 / 64 /96 /128 / 192 / 256 kbps.
• Set in “Phono “ function (6) & remain stop mode.
• Press the “ Info “ function and the LCD display will show the default bitrate (128 kbps)
• Press skip
or
buttons (13/2) to select the desired bitrate for encoding.
• Press again the “ Info “ to confirm the setting and the LCD display (1) resume to “ phono “ mode
Delete files (USB Mode) (Remote Control)
Delete single files
• Press and hold the “ Info “ button for 3 seconds and the LCD display (1) will show (del ---001)
• Press skip forward
or skip backward
(13/2) button to select the file going to delete.
• Press the “
●
Rec “ button to enter “ yes / no “ mode and then press skip forward
or skip backward
(13/2) to select “ Yes “ or “ No “.
• Press the “
●
Rec “ button again to confirm the setting.
16
16
