auna 10024187, Руководство пользователя

Страница: 12 / 16

Backlight
Your radio has 3 backlight settings:
1. Timeout: This option is used to set the period of time that you wish your display’s backlight to
remain lit when your radio is in both ON and STANDBY modes. The available options are:On/10
sec/20 sec/30 sec/45 sec/60 sec/90 sec/120 sec/180 sec. Selecting “On” will force your radio’s
backlight to remain on constantly. If you select a specific time delay, after the selected time period
has lapsed the display will dim down under the following two situations:
- When the radio is turned on and no operation under selected time out period.
- When the radio turns off into standby mode, the backlight will dim down after the time out period
has lapsed.
2. On level: This option will determine how bright the display’s backlight is lit while the radio is on
ON mode. There are 3 options for this setting: High, Medium& Low.
3. Dim level: There are 3 brightness levels of the Dimmed backlight available – low/medium/high.
Language
This setting will change the language in which the menu system is displayed on your radio. There are
four languages: English, French, German, Italian.
Factory reset
The DAB Radio can be reset to the factory defaults at any time, once a reset has been performed,
the DAB Radio will automatically begin Full scan.
1. Select “Factory Reset”, the display will shows:
2. Press “ ◄ ” or “ ► ” key to choose <Yes>, then press
“Select” to perform the rest.
Noted: once you do this operation, some of store
information will be missed like as preset station, Alarm
will be emptied.
SW version
1. Press “Select” key you can see the software version
directly
Note: To exit setup, press ‘MENU’ button.
Sleep Button
It allows you to set the sleep time
1. Press ‘Sleep’ button on your remote control,
the following screen will be displayed:
12
12