Streaming music via BT
1. Press Function button (5) to select “BT” mode
2. The BT LED indicator (24) will flashing, it means the BT in non connection/
searching mode.
3. Switch on the BT feature of your BT device (such as mobile phone) and select
“Goldsound” BT equipment to connecting.
4. Once the connecting was finish and connect successfully, the BT LED (24) will change to
light up.
5. Start to playback your BT device and enjoy the music by the main unit.
6. To re connect to another BT device conveniently, just press the BT disconnect button (5)
once, the system will disconnect with the existing BT directly, then repeat step 3 to
reconnect another one BT device.
Additional features
A. Sleep function
1. Press “Sleep” button “SLP-90 “ will shown on the LCD display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes
respectively and sleep icon
will indicate on LCD (1).
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press “ Sleep ” button until “SLP-off’ displayed and the
indicator
disappear on LCD display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB, SD or
iPhone/iPod mode respectively.
Press and hold the “Alarm” button to enter the alarm setting mode, the first two digits of clock will
flashing with alarm icon . Press Skip up
/ down
button to set the hour & then press “Alarm”
button again to confirm. Then press Skip up
/ down
button to set the minutes & press “Alarm“
button to confirm the alarm time, press Skip up
/ down
button to select wake up mode &
press “Alarm“ button to confirm. Then press Volume up/down button to adjust the wake up volume
level. Press the “Alarm“ button to complete the alarm setting.
Remark:
• If there is no music source being detected (such as USB or CD) when the preset time is reached,
system will default to “ Tuner ” function for wake up mode automatically.
• There are about 4 seconds for alarm setting mode, this system will return to normal mode auto-
matically if no keys being pressed in this time frame.
• During the alarm on mode, press the “On/Standby “ button will switch off the system.
Active/de-active timer function
1. To active the alarm function, press the “ Alarm ” button repeatedly until the alarm indicator
is
shown on LCD display (1).
2. To cancel alarm function by press again “ Alarm” button until the alarm indicator
disappear.
C. Mute function
Press to terminate the sound output from speaker temporarily and press again to resume the output
sound.
D. Display function
For convenience usage, press “ Display/ID3 “ button when system is on at any mode, the LCD display
(1) will show the current time.
17
